Z Space Modules

Z-Space DIB Modules

TAG Z-Space signal modules residing on your DIB are a cost-effective means to:

Distribute collectively many common DIB/HIB functions for signal distribution, device trimming, and power management
Deliver niche signal conditioning or precision measurements
Free up DIB real estate to accommodate increased parallelism
Support a specific drive or measurement range that a general-purpose instrument may not satisfy

TAG Z-Space modules provide a low cost, DUT-focused solution that will also reduce your DIB development costs.

How to Order

Z-Space Modules Product Briefing

FLEX Remote Start Switch (P/N 600-314-00)
	FLEX users can now execute an engineering test program just by pressing a switch located at the test head. The switch is rugged enough to be activated by hand or foot. Interface to the tester is through a 16’ USB cable. Download FLEX Remote Start Switch Datasheet

ZMR-2C32 (32xDPDT) Relay Module (P/N 600-313-00 [5V]; P/N 600-309-00 [12V])
	The ZMR-2C32 is a Z-space module that provides 32 DPDT relays for use in test circuits, controlled via the FLEX Extended UDB (ExtUDB) serial control bus. It plugs into a standard 244-pin MiniDIMM socket that accepts a 3.25” width board. Download ZMR-2C32 Datasheet

UDB Expander (P/N 600-316-00)
	The ZMU-208 is a Z-space module that interfaces to the FLEX Extended UDB (ExtUDB) serial control bus to provide 208 Utility Data Bits (UDB) for relay control in a test circuit. It plugs into a standard 244-pin MiniDIMM socket that accepts a 3.25” width board. Download ZMU-208 Datasheet

DC-Reference (FLEX) (P/N 600-317-00)
	The DC-REF-2 is a Z-space module that provides two 16-bit precision voltages, ranging from -12.5 to +12.5 volts.The two voltages enable pedestal test techniques or as reference to the servo loop controller module that is commonly used to test precision analog-to-digital converters. It plugs into a standard 244-pin MiniDIMM socket that accepts a 3.25” width board.

RF Quad Mixer (P/N 600-319-00)
	The RF Quad Mixer takes an RF input and mixes it with a local oscillator to provide a down-converted IF signal as output. The module contains four identical mixing circuits. SMA connections are used for all RF/IF/LO signals. Unlike most modules, this module mounts between the stiffener internal rails.

How to Order

No ATE company is more dedicated to providing you with the applications support resources you need—when and how you need them—to speed development time, reduce cost of test, and secure your product portfolio's success.

To learn more about TAG's customized engineering solutions, contact your local field support engineer or Sales representative.

We welcome your comments and questions about TAG.
Contact TAG Marketing