alt

The ETS-88TM is an optimal test platform for testing a wide variety of devices including: simple analog, high precision, high voltage, high current / power, automotive, video, audio, complex mixed-signal, as well as emerging power processes like SiC and GaN. The system is optimized for high throughput and low cost-of-test for single site, mulitsite, and index parallel applications. The test system hardware is designed to provide independent floating resources per site to avoid resource sharing across sites while improving site-to-site isolation and measurement accuracy.

 

    Expand All 
  • Applications

    Power Management ETS-88Devices-300x300-Teradyne.png

    • Low dropout regulators, DC-DC converters, Voltage regulators, Boost regulators, Multi phase PWMs, Battery chargers, Hot swap power managers, Gate drivers

    Precision Analog

    • Op amps, Instrument amplifiers, Video amplifiers, Audio amplifiers

    Automotive

    • Fuel injectors, ABS controllers, Airbag controllers, Automotive smart switches, CAN transceivers, Motor drivers

      Discrete & Power Modules

      • MOSFET, IGBT, Diodes, BJTs
      • Consumer SPM/IPM, Industrial solar/UPS/motors, Automotive HEV/IEV/SSV

      Converters and Mixed-Signal

      • Low speed/high resolution D/A converters, High speed D/A converters, Low speed/high resolution A/D converters, High speed A/D converters, CODECs
    • Advantages

      Innovative Architecture Sets a New Standard for Reduced Cost of Test

      • Multi Test Head design supports high parallel test efficiency, capable of testing up to four unique DUTs per test system in 1 square meter of floor space. Each test head offers:
        • Up to 72 analog channels
        • Up to 32 digital channels (66 / 132 MHz)
      • Industry leading Eagle Vision software operating from a dual quad core CPU controller supporting both index parallel and multisite test
      • Fully compatible with Eagle's line of Digital and Floating SmartPin™ Resources
      • Test system PC runs on familiar MS WindowsTM operating system and executes programs from C++ Visual StudioTM environment
    • Configurations

      The ETS-88 multiple test head architecture provides the flexibility to reconfigure the test system using software control. The system   is comprised of dual sector test head card cages for up to four sectors depending upon system configuration. Each set of sectors   can be bridged together within the test head card cage on an application-by-application basis. The sectors can be configured to operate independently, running unrelated applications if desired, or can all be bridged together to expand the site count of multisite applications.

      The system is controlled using a multi-core PC to maintain isolation between applications. This control method lets you assign cores and test heads to applications for the greatest test efficiency, and provides the ability to support single site, multisite, and I.P. applications from a common base platform.

      Each Test Head Contains: (up to four sectors depending upon configuration)

      Teradyne's ETS-88 Family of Testers

        Standard Configuration (Up to four sectors)   

        • Up to 32 digital channels    
        • Six floating resource slots for up to 72 analog  channels    
        • 32 C-Bits    
        • Eight programmable master clock channels     

        ETS-88TH/AC-2500 Configuration (two sectors)  

        • 12 Floating resource slots (six per sector)    
        • One DPU-16 instrument per sector (32 pins  total)
        • Two HPU instruments per sector (400 A total)     
        • AC-2500 card cage
          • AC instruments
          • Matrices
        • Electronic motor DIB actuator
      • System Options

        The ETS-88 test system is a general purpose precision analog and mixed-signal test platform designed for high volume production testing of integrated circuits. The system is optimized for high throughput applications, with a fully integrated multisite software and hardware architecture. Following the Eagle tradition, the ETS-88 test system offers high precision and high accuracy test capabilities. Test speed is only of value if the results are trustworthy. As such, the ETS-88 test system provides both measurement speed and high accuracy, following the Eagle tradition of providing high precision test capabilities with a robust assortment of available instruments such as V/Is, DC/AC voltmeters, digitizers, AWGs, digital pin electronics, and time measurement instruments, all optimized for multisite testing.

        ETS-88 Configurations and Capabilities:

        ETS-88 Configurations Digital Channels Analog Channels Maximum Voltage Maximum Current
        ETS-88 (2M Cabinet) 128 288 +/-1000 VDC 100 A
        ETS-88M (1.5M Cabinet) 64 144 +/-1000 VDC 100 A
        ETS-88D (Dual 1.5M Cabinet)

        64

        144 +/-1000 VDC 100 A
        ETS-88TH/AC-2500 32 144

        1500 VDC

        2500 VDC

        1200 A

        5000 A

        Instrument Options:

        8x8 MATRIX
              high voltage force / sense crosspoint matrix; any input channel can be connected to any output channel

        APU-12
              12 channel, four quadrant V/I with six current ranges ranging from 200 mA to 10 uA at +/-30 V

        CAMII
             instrument module designed to measure capacitance in the sub-picofarad range

        DAAU
              High-resolution generator and digitizer specifically designed for high performance audio applications

        DPU-16
              16 digital I/O channels supporting vector rates up to 132 MHz with 8M of standard vector memory

        HPU-100
              single channel V/I with 10 current ranges operating up to +/-100 V

        MPU-120
              four quadrants V/I with built in 16-bit digitizer capable of forcing voltage up to 120 V and current force up to 40 Amps

        QHSU
              two fully independent dual channel high-speed signal analyzers capable of source or measure up to 50 MHz

        QMS / QMS-T
              four precision (12-bit at 10 Msps or 16-bit at 200 ksps) independent floating differential volt meters that support AC and DC measurements up to +/-200 V

        QPLU
              low noise, analog source and measure resource with 1 PPM (20 bit) accuracy with 381nV resolution

        QTMU
              8 independent time measurement units multiplexed to digital pins with a start/stop and arm signal per sequencer

        SPECII
              test head expansion, relocating high power instruments to the mainframe cabinet.

        SPU Family (100, 112, 500)
              a suite of V/I’s capable of addressing a wide range of test requirements ranging from 100V / 2A to 500V / 50mA with fully AWG and digitizing capabilities per channel

        WCU-2220
             waveform capture instrument with full scale sensitivity from 0.2V to 2000V at 8-bit resolution with a decade of programmable offset available per range

      • Software

        Eagle’s software development environment and tool set is truly one of the strongest attributes of  the ETS-88 test system. Eagle’s software tools are easy to learn and use, and are fully integrated into the Microsoft Visual Studio development environment. The complete test system command  set is supported with automatic code generation tools (ACE™ and GrACE™). This means that users are not required to memorize command arguments and syntax. Graphical plotting tools are provided for simple point-and-click plotting of test oriented waveforms. RAIDE™ (Rapid Access Interactive Debug Environment) makes it easy to view and change tester hardware settings. In short, Eagle software provides a robust test development environment, offering customers an   easy learning curve and uncommon productivity. There are two versions of Eagle software: Eagle Vision (EV) and Eagle Vision MST  (EV-MST). Referring to multi-sector technology, Eagle Vision MST allows you to replicate test  programs across multiple test head sectors. The standard ETS-88 test system supports both software suites. Adding options, such as the AC-2500, may change which suite is  supported.  

        EAGLE VISION & EAGLE VISION MST GRAPHICAL TEST PROGRAMMING ENVIRONMENT

        Eagle Vision Key Features

        • Innovative, easy to use graphical methodology for controlling test system  resources
        • Fully integrated plotting tools
        • Eagle Vision advanced software tools for uncommon  productivity
          • Fully support multisite parallel testing
          • Complete support of pattern-based testing
          • Graphical programming methods reduce time-to-market through the introduction of simple and easy to operate tools

        Eagle Vision MST Key Features

        • EV-MST software architecture supports different modes of operation
        • Simultaneous independent applications
          • Each application can itself be multisite
          • Keeps tester utilization high by continuing to run other applications during changeover
        • Traditional multisite applications with synchronized testing on multisite handlers
          • Independent communications channels allows near 100% multisite efficiency
        • Full index parallel testing that maximizes turret handler throughput
          • Specialized datalog handling combines DUT data from different sequential stations
          • 100% resource independent QA test

        Software Suite Availability

        Software Suite

        ETS-88

        ETS-88TH/AC2500

        Eagle Vision

        Y

        N

        Eagle Vision MST

        Y

        Y

       Learn more about Eagle Vision and Eagle Vision MST industry leading software.